Assembled in USA. Unit equipped with Kulthon WJ9490Z-2 Compressor.
28-1/2''L X 16-1/4''W X 16-3/4''H
Electrical : 208-230 Volt 60 Hz 1 Phase
Nominal Performance

Cooling Capacity 2,696 / 4,490Watts
9,199 / 15,320 BTU/Hr
2,318 / 3,861 Kcal/Hr
Power Input 1,635 / 2,100 Watts
Lock Rotor Amps 45.00 / 45.00 Amps
Max Continuous Current - / - Amps
Rated Load Amps 7.10 / 9.20 Amps
COP 1.65 / 2.14 Watts / Watts

Testing Conditions

Condensing Temperature 54.40 °C 129.9 °F
Evaporating Temperature -6.70 / - °C 19.9 / °F
Liquid Temperature 46.00 °C 114.8 °F
Return Gas Temperature 35.00 °C 95.0 °F
Ambient Temperature 35.00 °C 95.0 °F

Application

Evaporating Range MBP/HBP A/C : -23.30 °C to 12.70 °C
(-9.9 °F to 54.9 °F)
Heat Pump : - °C to - °C
Refrigerant R404A
Refrigerant Flow Control Capillary tube/Expansion valve
Compressor Cooling Fan
Compressor and Motor data
Compressor Type Reciprocating
Displacement 26.70 cc.
Oil Type Polyolester Oil
Oil Charge 850 cc.
Motor Type C.S.R. ; 2 Pole 3,500 / 3,500 r/m
Voltage Range 203-264/- Volts 60/- Hz.
Winding Resistance at 25 ° C
Start 4.30 Ohms
Run 1.96 Ohms

Electrical Components

Motor Protector
Type Internal Overload
Model Number KGE 656-10
Open / Close 130-140 / 60-78 ° C
1st Cycle trip at 25 ° C 52.00 Amps(main) 31.00 Amps(start)
Motor Starter
Type Potential Relay
Model Number KGE 681-9 (RVA4AM6D)
Pick Up (max.) 242.00-272.00 Volts
Drop Out (min.) 60.00-121.00 Volts
Terminal Cover KGM 901-1
Start Capacitor 108-130 µF 330 VAC.
Disch Resistor for Start Cap 15000 Ohms 2 W
Run Capacitor 35 µF 425 VAC.

Mounting Kit

Rubber Grommet KGM 905-2
Sleeve Grommet KGM 903-2